MTEK

MTEK Flux Ballistic

$1,195

Shipping calculated at checkout.

Color:
Impact Liner/Retention Size:
Quantity:

Advanced Undercut Geometry. Multiple Protection Levels. All under 2.2lbs (1kg)


FLUX BALLISTIC

Description:

The FLUX Ballistic is the cornerstone of the innovative FLUX helmet system. This helmet was specifically designed to give you the highest level of safety, comfort and modularity currently available in a modern ballistic helmet. The lightweight shell is constructed of high performance polyethylene fibers, and features an undercutting geometric profile that follows the natural shape of your head providing exceptional stability and coverage. Additionally, all of the removeable fasteners have been designed for maximum strength and weight savings in order to further reduce the total system weight. 

The FLUX Ballistic features a 100% boltless shell. There are zero cuts or holes in or through the ballistic material, assuring maximum ballistic performance. The high cut edge profile was designed to be compatible with a wide range of existing communications headsets and accessories. Lightweight polymer retaining structures are bonded to the outside of the FLUX shell and provide a secure mounting platform for the FLUX M-LOK accessory rails and the Wilcox L4 three hole shroud. Several variations of ballistic side covers and mandible will soon be available to increase the protective coverage of your helmet if needed.

The interior Fluxliner™ offers excellent impact protection and is manufactured using a proprietary rate-sensitive foam. Two sets of adjustable comfort pads are included with each helmet, which let you manage the internal layout to customize the interior just for your head. The retention system also features Cam-Loc sliders for ease of adjustment, an ultra-suede chin cup. The ends of the retention terminates with Inverseclips® allowing for easy removal and additional safety.

Specifications:

Total System Weight: 2.2 lbs (1 kg)

Ballistic Shell Weight: 1.1 lbs (0.5 kg)

Minimum Usable Weight: 1.75 lbs (0.8 kg)

Ballistic Protection: NIJ IIIA (0106.01-0108.01)

Protective Coverage: 164in^2 (1058cm^2)

Overall Dimensions: 10.5" x 9.5" x 6.5" ( 267x241x165 mm)


Impact Liner Sizing:

Retention Sizing:


Fluxliner™:

  • Manufactured using a proprietary rate-sensitive foam for excellent impact protection

  • Multiple comfort pads to customize fit and minimize pressure points

  • Moisture wicking fabric coverage

  • Meets ACH Impact requirements*

  • Channeled design promotes airflow around head

Retention System:

  • Lower rear mounting points for maximum stability

  • Inverse Clip® for retention customization or removal

  • Suede leather chin cup for incredible comfort

  • Cam-Loc sliders for one-handed adjustment and secure fit

Wilcox Industries L4 Shroud

  • Glass-reinforced polymer frame

  • Machined/anodized aluminum mount interface

  • Low profile anti-snag design

  • Anodized aluminum fasteners

Additional Information:

FLUX Ballistic (PDF)

Accessories:

FLUX Accessories

*AR/PD 10-02 rev A

Ballistic Shell:

  • IIIA Ballistic Performance (NIJ 0106.01-0108.01)

  • Extremely lightweight (1.1 lbs / 0.5 kg)

  • 100% Boltless (includes accessory rails, shroud and retention)

  • Non-darted ballistic material (no internal seams or weak points)

  • Undercut geometry contours to the natural shape of the head

  • High side clearance for communications headsets

  • Available in Coyote, Black, Green, and Multicam

FLUX M-LOK Rails:

  • Accepts Magpul® M-LOK accessories

  • Glass filled polymer construction

  • Low profile anti-snag design

  • Connects to FLUX bonded retaining structures via anti rotation nuts

  • O2 center-release-buckle (CRB) slot

  • Horizontal and vertical M-LOK negative mounting space areas

  • Removable spacer for upgradable protective coverage

  • Multiple tie down points for routing communication or power cables

  • Removable for servicing or additional weight reduction

Additional Items:

  • Exterior Velcro® Loop for patches, IR strobes & counterweights

  • Battle bungees for mounted NVG stabilization

  • User manual

  • Warranty Card

  • Drawstring helmet bag

If you are purchasing an export controlled item which is ITAR restricted then we reserve the right to request additional documentation before fulfilling and shipping your order. Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulation, Parts 120-130. 

When purchasing an ITAR restricted item you must be a legal US citizen. Export of the commodities described herein is strictly prohibited without a valid export license.  A statement will appear at the bottom of each restricted product's page indicating export restrictions apply in accordance with the International Traffic in Arms Regulation. 

Customers are not required to submit additional documentation unless we request it. If needed you will be contacted within 24 hours of placing your order. (Such as but not limited to a completed *ITAR compliance acknowledgement form with your original signature and/or a government issued ID. If additional documentation is requested, your order will not ship until it has been completed.) For more details please click the *ITAR Compliance Acknowledgement Form below.

Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulation, Parts 120-130. 

Returns:

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

If your item has not shipped and you ask for a return and refund or exchange we would be happy to accept your request.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at sales@northwestgearsupply.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at sales@northwestgearsupply.com.


Damages and issues:
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items:
Certain types of items cannot be returned, like custom products (such as special orders or personalized items), night vision, used items, or large group purchases specially ordered from the manufacturer. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges:
We do not accept exchanges for items that were received as described. However, if you got an item that did not arrive as described, we would be happy to exchange the items purchased for another item we sell or give a refund when the item is returned in the same condition as it was sent.


Refunds:
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

You may also like

Recently viewed